For wire & cable harnessing
Will not crack, split, slip or flag when exposed to various environments
UL510 & CSA approved
Glass stabilized solvent based acrylic transfer adhesive.Wound on an easy to remove paper liner
High quality adhesive with strong holding power – excellent resistance to heat, UV, and aging
Tape bonds well to most surfaces – papers, metals, films, etc.
Glass stabilized solvent based acrylic transfer adhesive
Wound on an easy to remove paper liner
High quality adhesive with strong holding power – excellent resistance to heat, UV, and aging
Tape bonds well to most surfaces – papers, metals, and films.
Hand-tearable PETP scrim impregnated with an aggressive water-borne acrylic adhesive
No VOC’s present with this aqueous adhesive based tape
Excellent age resistance.
Hand-tearable PETP scrim impregnated with an aggressive water-borne acrylic adhesive.
Special adhesive formulation provides for very good plasticizer resistance – can be used to replace hot melt and spray adhesives on vinyl (TPP) and carpet cove base and other construction trim.
Solvent based acrylic adhesive coated on clear 0.5 mil polyester
Features cold-resistant -40°F to 250°F temperature range and a UV stabilizer system
Good on many substrates such as metals, foam, paper, plastic, foil, and film for laminating, bonding, splicing, and attaching.
Long lasting marking solutions for off-limit areas or crowd control.
Durable non-adhesive polyethylene film with bright visible color.
Durable red non-adhesive polyethylene film
Available in TRUE 2 mil thicknesses
Customized Danger tape with your company logo is available.
Heighten your brand awareness with Electro Tape’s line of custom logo caution tapes!
Durable, non-adhesive yellow polyethylene film which will stand up to the elements.
Unlimited mix of legends available.
Premium product constructed for long-term projects.
Resists wind, snow and other harsh elements.
Spanish bilingual legend.
Alternating pattern of reflective and non-reflective printed legend.
Effective in any lighting condition.
Designed for 24 hour job sites.
Durable yellow non-adhesive polyethylene film
Available in TRUE 3 mil thicknesses
Installs in seconds; just peel off paper backing and press into place
Unaffected by environmental conditions and mild acid or alkali exposure under normal conditions
Available in range of colors or striped pattern for subtle or high visibility – including “Glow-in-the-Dark” (call for details).
Available Colors: 
Economical 1.8 mil carton sealing tape for light packaging requirements.
Strong yet thin polypropylene film backing.
Consistent and reliable performance.
The perfect combination of performance and value
2 mil – Tensile Strength: 24 lb/in
Available in clear & tan
2.6 mil high strength, heavy duty carton sealing tape with acrylic adhesive.
Ideal of sealing, splicing and other demanding packaging applications subjected to rough shipping conditions where high performance is required.
Available in clear only
Strong, yet easy tear flatback tape
Tight unwind – suited for overlap applications
Hand tearable!
‘Clear To The Core’
Solvent based acrylic adhesive
High strength – Biaxially oriented polypropylene
‘Clear To The Core’
Solvent based acrylic adhesive
High strength suitable for heavy-duty carton sealing needs
Bright, vibrant colors allow for tape use in carton identification
Excellent resistance to aging, weathering, sunlight and yellowing
Adhesion: 22 oz/in – Tensile Strength: 18 lb/in
Available Colors: 
New & Improved Product!
Engineering grade retroreflective tape ideal for safety signage applications
Recommended for various flat surfaces and substrates
Meets ASTM D 4956 Reflectivity Type 1
Available Colors: 
New & Improved Product!
Laminate of clear film over stripe enhances color and pattern durability
Meets federal specification L-S-300C, Reflectivity 1, Class 1
Available Colors: 
8 mil polyester based conformable tape with 7-year durability
Meets NHTSA 49CFR Part 571 Conspicuity regulations for DOT
Available Colors:
Builds brand awareness – great way to advertise
Only adds a few ¢ to package cost
Base film available in a wide range of colors.
Designed for use as office supply tape – fits well on most table top dispensers
Works well in industrial applications for quick easy bundling and tabbing applications that require no knives.
2 mil
Used for palletizing, bundling, and unitizing corrugated boxes and other containers
Ideal for light demand applications
Colored versions can be used for floor marking in exhibition hall preparation and in other color identification and differentiation needs
Available Colors:
Uni-directional, fiberglass strand reinforced
Designed for utility – low demand applications
Industry Standard for temporary carpet hold down for the convention industry – leaves no residue off most surfaces
Thick profile is durable and conformable to irregular surfaces.
Used in a variety of applications including trim attachment, signs, graphics, skin to frame assembly, furniture and appliance assembly
Some low energy substrates may require use of a primer for optimum bond strength, or use of our 658BLSE Low Energy EHB Tape
Clear appearance makes this tape the choice when attaching parts or assembling products that involve glass or clear materials – such as shower door enclosure and parts attachment and polycarbonate displays
Available Colors: 
Extremely aggressive, high tack, white synthetic rubber adhesive coated on a durable cotton cloth wound on a gold paper liner.
Heavy adhesive coat weight provides instant grab on most surfaces.
Hand-tearable PETP scrim impregnated with an aggressive water-borne acrylic adhesive
Special adhesive formulation provides for very good plasticizer resistance. Can be used to replace hot melt and spray adhesives on vinyl (TPP) and carpet cove base and other construction trim
Typically used in construction environments for surveying, mapping, and roping off an area.
Non adhesive PVC carrier ensures no residue left behind.
Available Colors: 
Glow version designed to provide greater visual impact.
Our 875 Glow Flagging Tape is a non-adhesive PVC ribbon for marking and tagging applications including utilities, construction, forestry and more.
Available Colors: 
Hazard striped version of our 870S Series Flagging Ribbon/Tape.
Effectively mark specific hazards with our lightweight PVC flagging ribbon.
Available Colors: 
Strong yet hand-tearable paper coated with a high shear, cured natural rubber adhesive wound on a textured white paper liner
Bonds to almost any smooth surface – yet removes clean off most surfaces
Used in the manufacture and repair of golf club grips, trophy mounting, web splicing – wherever high shear is required
Conformable double coated paper tape coated with an all-around performing solvent based natural rubber adhesive
Good balance of tack and shear
Economical alternative to our 591 Series
Transparent, moderate tensile, high adhesion
Smooth, clear, rubber based adhesive
High strength fiberglass strands are securely bonded to tough and durable polypropylene film backing
Our strongest filament strapping tape
High strength fiberglass strands are securely bonded to tough, durable polypropylene film backing
Transparent, high tensile, high adhesion, medium impact strength, rubber based pressure sensitive tape
Low density, compressible PVC foam coated one-side with a general purpose, quick grab acrylic adhesive. Reverse wound, carried on a white paper release liner
Exhibits a good combination of flexibility and conformability with strength and wear resistance
Excellent weatherability and chemical resistance
Foam carries an overlaminate of mylar (polyester) to provide enhanced abrasion resistance and rigidit
Low density, compressible PVC foam coated one-side with a general purpose, quick grab acrylic adhesive
Suitable for a variety of gasket functions, including seaming, sealing, spacing, squeak and rattle abatement, barrier to dust and light penetration, and dissimilar metals separation
Higher density black polyethylene foam carrier provides increased foam integrity and better internal strength than traditional PE foam tapes. Foam is less likely to split under heavy demand applications.
Adheres well and provides long-term bonding of various substrates such as glass, metals, papers, and films and some low energy plastics and painted/powder coated metals.
Suitable for mounting various substrates such as glass, metals, some plastics, papers, and films
May be used to provide a gasket, seal, or to cushion and dampen vibration
Available Colors:
Medium density, compressible PVC foam coated one-side with a premium, quick grab acrylic adhesive. Reverse wound, carried on a white paper release liner
Increased density imparts a more sturdy, less compressible foam that still exhibits a good combination of flexibility and conformability with strength and wear resistance.
Premium grade, DC non-woven tissue tape usable on a wide variety of surfaces
High quality adhesive with strong holding power – excellent resistance to heat, UV, and aging
Temperature range up to 350°F for short term exposure making it suitable for corrugated splicing applications
Acrylic adhesive system offers great resistance to UV, aging, and oxidation. Makes this tape best for outdoor exposure
Used for mounting signs, placards, trophy plates, plastic extrusions, and metal trim
May be used to provide a gasket, seal, or to cushion and dampen vibration.
Available Colors:
Permanent bond of plastic, metal and wood surfaces
Excellent shear strength, high adhesion and high instant tack
Very Good temperature, UV, aging, and moisture resistance
Used for mounting trophy nameplates, heavy signs or other permanent mounting requirements.
Premium grade, DC non-woven black tissue coated with a black pigmented, high shear, acrylic adhesive
Dense black coverage makes this recommended for mounting or laminating to black foams or other carriers to produce a finished product with little to no light penetration (i.e. gaskets for speakers, back-lit signs, light fixtures, electronics)
Black color provides high visibility in web splicing allowing for ease in culling out splices/web imperfections.
Available Colors:
The ultimate protection for underground utility lines
Highly resistant to all chemical and organic compounds
Immediately identifies the type of utility line buried below, both by permanently printed legend and an APWA designated utility color.
Available APWA Uniform Color Codes:
100% virgin LDPE with lead free pigments and color stabilizers to resist bleeding
Identifies the type of utility line buried, below, both by printed legend and an APWA designated utility color
Highly resistant to all alkaline, chemical and organic compounds
Available APWA Uniform Color Codes:
Heavy duty woven polypropylene film ensures long life.
High tensile strength provides a rigid barrier resistant to high winds and rigorous impact.
Yellow or red woven carrier with solid black line down through web center.
Conformable, strong polyester coated with a high quality solvent based acrylic adhesive.
Excellent for outer wrapping on capacitors and coils, holding transformer construction & wire harness bundling.
Flame retardant – complies with requirements of UL 510.
Available Colors:
The ultimate electrical insulating tape – ideally suited to continuous high temperature operating conditions.
Provides residue free protection of gold contacts from molten solder during hot wave solder leveling process.
Continuous service temperature range of -100°F to 500°F with short term intermittent service to 600°F.
Offers excellent mechanical protection against abrasion and penetration of low voltage cable, splices and wire.
Suitable for temporary binding and harnessing applications.
Useful for multitude of miscellaneous general purpose uses – i.e. when applied onto tool handles, it provides a non-slip surface.
Available Colors: 
Provides heat stable insulation for hot spot applications, such as motor leads, and switches, and controls.
Insulation class: 130°C (266°F)
Meets UL requirements and AA-59770 Type GFT (supersedes MIL-I-15126F (Type GFT)
Self amalgamating rubber tape insulates and seals out moisture from electrical connections up to 600 V.
Also widely used in the agricultural industry for grafting crops.
Its high resistance to salt water, steam, oils, detergents, and other chemicals make it an ideal tape for service drops, bolted, and ground rod connections.
Cotton cloth impregnated with scientifically compounded pure rubber based adhesive for maximum elasticity and moisture resistance.
Standard color: Black
Tape Thickness: 15.0 mil
Tensile Strength: 40 lb/in
Self-bonding silicone rubber wrap which readily adheres to itself when wrapped under tension.
Fuses to form a homogeneous mass within 24 hours at room temperature.
Resistant to salt water, sunlight, and fuels.
Self-bonding 1/8″ thick (125mil) electrical grade rubber mastic.
Use for insulating and moisture sealing splices and terminations on solid electric cable.
Can be wrapped, stretched or molded around irregular shapes for insulation build up, water sealing and surface protection.
Widely used for cellular tower electrical splices.
Effective for use in industrial applications for permanent bundling or wrapping where conformability and aging resistance are critical.
Suitable as a phasing tape for electrical conduit, circuit wires, motor leads, splices and terminations. Very conformable – provides moisture-tight electrical and mechanical protection. Resists UV rays, acids, alkalis, abrasion, moisture, and corrosion.
Available Colors:
Suitable for higher demand vinyl tape requirements.
Tough, yet flexible offering a moisture-tight seal even in hot and cold climates.
Resistant to chemicals, corrosive acids, alkalis and solvents.
Premium quality phasing tape for electrical conduit, circuit wires, motor leads, splices and terminations. Very conformable with a matte finish – provides moisture-tight electrical and mechanical protection.
Available Colors:
Superior for harnessing of wires and cables.
Often used in conjunction with our rubber tapes as a protective outer jacketing wrap.
High rebound nature to provide moisture-tight electrical and mechanical protection.
Superior quality 8.5 mil black electrical tape
Suitable for cold and hot environments
Memory (elasticity) of tape allows it to hold tightly and provide pressure without slipping or flagging
11 tape colors designed to meet OSHA safety coding requirements
Excellent conformability to uneven shapes and surfaces
Suitable for decorating, striping and sealing
Available Colors:
Soft white PVC film tape designed specifically for clean room applications where contaminant / dust control is critical.
Tape is provided on a 3” plastic core and each roll wrapped to meet clean room requirements.
Available Color(s):
Stuck-O-Tape is the brand of choice for stucco professionals!
For stucco, plaster masking and sunlight (UV) exposure applications.
For outdoor applications where the tape is required to perform over an extended period of time up to 30 days but will offer easy, residue-free removal.
Low residue yet aggressive adhesive allows for use in surface protection applications.
No UV additives so not recommended for long term outdoor use.
Suitable for general purpose permanent patching, splicing, masking, and seaming.
For window protection with stucco, plaster, and other coating applications.
Rated up to 180 days for clean removable on most solid surfaces.
Tape constructed with a conformable film and premium rubber adhesive which adheres well to range of low energy surfaces (LSE) to ensure adequate hold through life of project. UV, moisture, chemical, and age resistant.
For stucco and plaster masking applications. Resists outdoor exposure, moisture, chemicals and weathering.
Suitable for floor underlay splicing.
Red color provides high visibility to ensure seam splice has been completed.
Serrated edges for easy, hand tear-ability.
Suitable for general purpose permanent patching, splicing, masking, and seaming.
Moisture & chemical resistant. Features a rubber based adhesive.
Natural rubber adhesive system
Serrated edges for ease in tearing
Suitable for wire identification, seaming and surface protection
Easily conforms to irregular surfaces including metal, masonry, wood, vinyl, aluminum and more
Its high durability makes this tape a great choice for protection of doorway thresholds and other surfaces where heavy traffic is involved
Easy to use / easy to remove – leaves no messy residue
Moisture, chemical and UV resistant
Tape provides permanent bond – not designed for temporary protection requirement
Acrylic adhesive provides performance in broad range of temperatures as well as excellent aging characteristics
Available Colors: Clear
High tack acrylic adhesive, conformable film and high release backside combine to make a tape suitable for “Bond-Breaker” requirement for newly poured concrete when making expansion joints.
Tape is placed in void cut into newly cured concrete. Material used to fill void does not stick to tape backside allowing for tension release and eliminating cracks.
SPVC film coated with a rubber based adhesive.
High elongation and excellent conformability for wire harnesses.
Matte finish.
General purpose tape offering both economy and versatility!
Used for a range of packaging, bundling, holding, splicing, masking and labeling applications.
Rated Service Temperature: 32°F to 160°F
Clean removal from a variety of surfaces!
UV resistant product with a specially formulated adhesive system permits clean removal from a wide variety of surfaces up to 14 days.
Highly versatile product suitable for use on glass, most wallpaper, metal, painted or unpainted wood and stained or painted wallboard.
Not recommended for lacquer applications.
Mid grade performance suitable for use in masking applications where moderate heat is applied.
Featuring a natural rubber adhesive.
Rated Service Temperature: 0°F to 203°F
Mid grade performance suitable for use in masking applications where moderate heat is applied.
Featuring a natural rubber adhesive.
Rated Service Temperature: 0°F to 180°F
Special adhesive system permits clean removal from a wide variety of surfaces for up to 7 days.
UV and solvent resistant to prevent bleed through in painting applications that don’t require elevated temperatures.
PVC carrier is top coated with an overlaminate of clear polypropylene film to enhance performance.
Lamination protects the tape for long life & durability in heavy traffic areas.
Available Colors: 
Striped pattern warns of physical hazards & dangers such as low pipes, ceilings, steps, doorways and exits.
When applied to trucks, forklifts & other vehicles, it increases danger awareness.
Available Colors:
Pipe Thread Seal Tape
Suitable for standard, non-challenging thread seal requirements.
Temperature Range: 375°F to 500°F
Best for thread seal applications where quicker build-up and stronger puncture resistance is required.
Meets BUY AMERICA ACT for military & government requirements.
Designed specifically for gas lines of all types – natural gas, butane and propane
Identified by light yellow color
Temperature Range: -450°F to 550°F
Nickel pigment additive ensures proper leak-proof seal on all stainless steel fittings – even course ones.
Prevents galling, seizing and corrosion.
Identified by light gray color.
Temperature Range: -475°F to 550°F
Economical yet effective pipewrap tape which protects from corrosion, abrasion and electrolytic action.
Pliable, easy to apply.
Wound on 1.5″ ID core.
Available Colors:
The rubber adhesive in our 322 Series provides for high adhesion and quick stick for a strong initial bond.
Superior conformability in vapor sealing of fiberglass duct board, sheet metal ducts and FSK systems. High tack cold weather acrylic adhesive combines extremely high quick stick at normal temps with superior performance at low temperatures and high humidity.
Economical foil tape – great all-around properties. Featuring an aggressive rubber based adhesive which bonds permanently to both industrial and HVAC surfaces.
2 mil foil tape
Superior high temperature and high humidity performance.
Improved vapor sealing of fiberglass duct board, sheet metal ducts and FSK systems.
FSK (Foil/Scrim/Kraft)
Primarily used for vapor sealing and patching on FSK faced fiberglass duct board.
Tri-directionally reinforced with fiberglass scrim for superior tear resistance.
UL 181A-P & B-FX Listed Premium Cold Weather Foil Tape for HVAC
Superior performance in all climate conditions – Ideal for sealing fiberglass duct board, dryer ventilation sealing, metal-to-metal seaming for duct systems
Broad Temperature Range: -20°F to 325°F
Tough, contractor grade closure system for UL Listed flexible, non-metallic air duct
Suitable for metal to metal connections in HVAC and refrigeration applications
Dryer vent and bath fan duct sealing
Bolt Brand Value Grade Duct Tape offers good adhesion in short-term, low-demand applications on relatively clean surfaces with light weather exposure.
ALL NEW LOOK!
This Economy Grade Duct Tape offers good adhesion in short-term, low-demand applications on relatively clean surfaces with light weather exposure.
Available Colors:
206 Series
Our Utility Grade Duct Tape offers good adhesion in short-term, low-demand applications on relatively clean surfaces with light weather exposure.
Available Colors:
Our Bolt Brand™ General Purpose Duct Tape is an excellent blend of value and performance for general purpose applications.
Additional colors offer use for color coding / high visibility applications.
Available Colors:
203 Series
Good for hanging poly and some applications where clean removal is a benefit.
Broad range of colors allows for color coding and/or color matching in wire hold down applications.
Available Colors:
The preferred choice of many for hanging poly sheeting, heavy duty bundling and other demanding applications.
Available Colors:
Used for a myriad of hold-down applications in the entertainment / AV industries.
High shear, high quality adhesive offers clean removal from most surfaces.
Matte finish provides low light reflectivity.
Superior quality and performance for the most demanding industrial applications.
High tensile strength, very durable duct tape with clean release.
Available Colors: 
Highly conformable foil with a heavy-duty butyl rubber adhesive coat weight (33 & 43 mil thicknesses) provides an instant watertight bond to many substrates.
Designed for seaming and sealing leaks and cracks in a variety of commercial and construction applications. Can be used for temporary to permanent repair in roofing and commercial transportation applications.
Available in 2 thicknesses: 35 mil & 45 mil
Printed with U.P.C. shield for quick code recognition.
Pliable, easy to apply.
Available in black only.
Mega Adhesion, Thickness & Strength! MegaBolt™ Super Thick Duct Tape features a durable black polyethylene (PE) coated cloth backing and a mega thick layer of aggressive natural rubber adhesive.
Available Colors: