Premium Filament Strapping Tape – 350 lb – 191 Series

Our strongest filament strapping tape

High strength fiberglass strands are securely bonded to tough, durable polypropylene film backing

Transparent, high tensile, high adhesion, medium impact strength, rubber based pressure sensitive tape

Description

Our 191 Series filament strapping is a transparent, high tensile, high adhesion, medium impact strength, rubber based pressure sensitive tape designed for your most critical packaging applications.

High strength fiberglass strands are securely bonded to tough, durable polypropylene film backing by our unique laminating process, which insures full utilization of the tape roll without backing failure due to strand de-lamination or edge unraveling.

Smooth, clear, rubber based adhesive is applied to give an even spread, which insures full surface contact for maximum holding power.

Item # Size Units / Case Pack
300505 1/2″ (12 mm) x 60 yd 72 / case Accordion
300507 3/4″ (18 mm)x 60 yd 48 / case Accordion
300510 1″ (24 mm) x 60 yd 36 / case Accordion
300520 2″ (48 mm) x 60 yd 24 / case Accordion

Technical & Consumer Data

Physical Properties

Backing: 1.1 mil Polypropylene
Adhesion to Steel: 77 oz./in. width
Tensile Strength: 350 lbs./in. width
Elongation: 4.0%
Total Thickness: 6.2 mils
Quick Stick to SST: 42 oz/in. width
Shear Holding Power (1” x 1” x 1000gms): >96 hours

Physical characteristics shown are averages from tests recommended by our own procedures. A particular roll may vary slightly from these averages. The buyer should determine the suitability for his own use.

Downloads

Technical Data Sheet

You may also like…