HV Linerless Rubber Splicing Tape – 30 mil – 43SW Series
Self-bonding, highly comformable EPR rubber – linerless.
Use as a primary electric insulation for low and high voltage applicatdions through 69 kV.
Tape exhibits high thermal conductivity.
When splicing electric lines, it’s important to understand that certain types of rubber tape can only be safely used on wires up to a certain current. That is why we offer electrical splicing tape for both low and high voltage lines. They are specifically manufactured for insulation and keeping out moisture by quickly adhering to surfaces in a self-fusing solid mass of protection without being corrosive to copper or aluminum conductors.
Our rubber electrical tapes withstand splitting and cracking when used under normal operating temperatures, which vary by type. However, if working with extreme high and low temperatures, we recommend our silicone rubber wrap.
Power cable repair, electrical service drops, bolted connections, pipe repair, automotive, marine, construction, cellular towers, and more.
Self-bonding, highly comformable EPR rubber – linerless.
Use as a primary electric insulation for low and high voltage applicatdions through 69 kV.
Tape exhibits high thermal conductivity.
Self amalgamating rubber tape insulates and seals out moisture from electrical connections up to 600 V.
Also widely used in the agricultural industry for grafting crops.
Its high resistance to salt water, steam, oils, detergents, and other chemicals make it an ideal tape for service drops, bolted, and ground rod connections.
Butyl based insulation in 1/8″ (125 mil) thickness for easy and quick buildup.
Will not corrode copper or aluminum.
Highly moisture resistant.
Made in the USA.
Self-bonding silicone rubber wrap which readily adheres to itself when wrapped under tension.
Fuses to form a homogeneous mass within 24 hours at room temperature.
Resistant to salt water, sunlight, and fuels.
Self-bonding 1/8″ thick (125mil) electrical grade rubber mastic.
Use for insulating and moisture sealing splices and terminations on solid electric cable.
Can be wrapped, stretched or molded around irregular shapes for insulation build up, water sealing and surface protection.
Widely used for cellular tower electrical splices.