Glass stabilized solvent based acrylic transfer adhesive.Wound on an easy to remove paper liner
High quality adhesive with strong holding power – excellent resistance to heat, UV, and aging
Tape bonds well to most surfaces – papers, metals, films, etc.
Glass stabilized solvent based acrylic transfer adhesive
Wound on an easy to remove paper liner
Tape bonds well to most surfaces – papers, metals, and films.
Hand-tearable PETP scrim impregnated with an aggressive water-borne acrylic adhesive
No VOC’s present with this aqueous adhesive based tape
Excellent age resistance.
Hand-tearable PETP scrim impregnated with an aggressive water-borne acrylic adhesive.
Special adhesive formulation provides for very good plasticizer resistance – can be used to replace hot melt and spray adhesives on vinyl (TPP) and carpet cove base and other construction trim.
Designed for permanent hold-down of carpet
Versatile quick-stick product for use on foams, plastics, metals and composite materials or for web splicing
Temperature range: 10°F to 170°F. Not suitable for applications involving elevated temperatures.
Solvent based acrylic adhesive coated on clear 0.5 mil polyester
Features cold-resistant -40°F to 250°F temperature range and a UV stabilizer system
Good on many substrates such as metals, foam, paper, plastic, foil, and film for laminating, bonding, splicing, and attaching.
High coating of a premium, solvent based acrylic adhesive coating
Poly liner ensures ease in liner removal as well as allowing tape to be die cut
Excellent for plastic extrusions, irregular surfaces, metal profile extrusions and decorative trim
Great as a banner hem tape in graphics industry. Adhesive is plasticizer resistant and doesn’t deteriorate on soft vinyl – holds true for long life
Hand-tearable and conformable high-end, clear tape featuring a 0.5 mil polyester with a heavy mass of solvent based acrylic adhesive coating carried on a paper liner
Extremely aggressive adhesive ensures adhesion to a wide variety of smooth and textured surfaces. Capable of bonding low surface energy substrates
Industry Standard for temporary carpet hold down for the convention industry – leaves no residue off most surfaces
Thick profile is durable and conformable to irregular surfaces.
Used in a variety of applications including trim attachment, signs, graphics, skin to frame assembly, furniture and appliance assembly
Some low energy substrates may require use of a primer for optimum bond strength, or use of our 658BLSE Low Energy EHB Tape
Clear appearance makes this tape the choice when attaching parts or assembling products that involve glass or clear materials – such as shower door enclosure and parts attachment and polycarbonate displays
Extremely aggressive, high tack, white synthetic rubber adhesive coated on a durable cotton cloth wound on a gold paper liner.
Heavy adhesive coat weight provides instant grab on most surfaces.
Special adhesive formulation provides for very good plasticizer resistance. Can be used to replace hot melt and spray adhesives on vinyl (TPP) and carpet cove base and other construction trim
Strong yet hand-tearable paper coated with a high shear, cured natural rubber adhesive wound on a textured white paper liner
Bonds to almost any smooth surface – yet removes clean off most surfaces
Used in the manufacture and repair of golf club grips, trophy mounting, web splicing – wherever high shear is required
Conformable double coated paper tape coated with an all-around performing solvent based natural rubber adhesive
Good balance of tack and shear
Economical alternative to our 591 Series
Low density, compressible PVC foam coated one-side with a general purpose, quick grab acrylic adhesive. Reverse wound, carried on a white paper release liner
Exhibits a good combination of flexibility and conformability with strength and wear resistance
Excellent weatherability and chemical resistance
Foam carries an overlaminate of mylar (polyester) to provide enhanced abrasion resistance and rigidit
Low density, compressible PVC foam coated one-side with a general purpose, quick grab acrylic adhesive
Suitable for a variety of gasket functions, including seaming, sealing, spacing, squeak and rattle abatement, barrier to dust and light penetration, and dissimilar metals separation
Higher density black polyethylene foam carrier provides increased foam integrity and better internal strength than traditional PE foam tapes. Foam is less likely to split under heavy demand applications.
Adheres well and provides long-term bonding of various substrates such as glass, metals, papers, and films and some low energy plastics and painted/powder coated metals.
Suitable for mounting various substrates such as glass, metals, some plastics, papers, and films
May be used to provide a gasket, seal, or to cushion and dampen vibration
Medium density, compressible PVC foam coated one-side with a premium, quick grab acrylic adhesive. Reverse wound, carried on a white paper release liner
Increased density imparts a more sturdy, less compressible foam that still exhibits a good combination of flexibility and conformability with strength and wear resistance.
Premium grade, DC non-woven tissue tape usable on a wide variety of surfaces
Temperature range up to 350°F for short term exposure making it suitable for corrugated splicing applications
Acrylic adhesive system offers great resistance to UV, aging, and oxidation. Makes this tape best for outdoor exposure
Used for mounting signs, placards, trophy plates, plastic extrusions, and metal trim
May be used to provide a gasket, seal, or to cushion and dampen vibration.
Permanent bond of plastic, metal and wood surfaces
Excellent shear strength, high adhesion and high instant tack
Very Good temperature, UV, aging, and moisture resistance
Used for mounting trophy nameplates, heavy signs or other permanent mounting requirements.
Premium grade, DC non-woven black tissue coated with a black pigmented, high shear, acrylic adhesive
Dense black coverage makes this recommended for mounting or laminating to black foams or other carriers to produce a finished product with little to no light penetration (i.e. gaskets for speakers, back-lit signs, light fixtures, electronics)
Black color provides high visibility in web splicing allowing for ease in culling out splices/web imperfections.