Extreme Tack Acrylic Transfer Scrim Tape – 9 mil – 66692 Series

Hand-tearable PETP scrim impregnated with an aggressive water-borne acrylic adhesive

Special adhesive formulation provides for very good plasticizer resistance. Can be used to replace hot melt and spray adhesives on vinyl (TPP) and carpet cove base and other construction trim


Our 66692 Series extreme tack scrim tape is an HIGHLY aggressive brown PETP scrim coated on both sides with a water borne modified acrylic adhesive. This hand-tearable tape is supplied on a natural siliconized paper release liner. The adhesive system of this double coated tape has excellent tack combined with a high adhesive strength, and will bond well to nearly all materials; even to difficult surfaces like foams, PE and PP films.

The heavy adhesive weight ensures quick grab and hold on highly textured surfaces. It has excellent temperature, UV, aging, and water vapor resistance.

Special adhesive formulation provides very good anti-migration of plasticizers.


  • Used for permanent bonding of various materials such as fabrics, wallboard, plastics – including PVC, metal and wood surfaces.
  • Acrylic adhesive provides long term performance.
  • Also used to laminate to foams and films – scrim reinforcement provides for improved lay down.
Item # Size Units / Case Pack
6669210 1″ (24 mm) x 36 yd 36 / case Bulk
6669220 2″ (48 mm) x 36 yd 18 / case Bulk
6669230 3″ (72 mm) x 36 yd 16 / case Bulk
6669240 4″ (96 mm) x 36 yd 12 / case Bulk

Technical & Consumer Data

Physical Properties

Backing: PETP scrim
Adhesive: Modified Acrylic Adhesive
Total Thickness: 9.2 mil exclusive of liner
Adhesion: > 120 oz / inch
Temperature Resistance: up to +248°F
Condensation Water Resistance: Good
Aging Resistance: Very Good
Softener (Plasticizer) Resistance: Very Good

The physical properties listed above are typical test results obtained from a series of laboratory tests and should not be used for the purpose of writing specifications. Before using this product, user shall determine the suitability of the product for his/her use; and user assumes all risks and liabilities in connection therewith. All test procedures used are in accordance with ASTM and PSTC methods.


Technical Data Sheet

You may also like…