Industrial Grade Masking Tape – 254 Series

Mid grade performance suitable for use in masking applications where moderate heat is applied.

Featuring a natural rubber adhesive.

Rated Service Temperature: 0°F to 203°F

Description

Mid Grade creped paper masking tape suitable for medium duty masking, bundling and holding under a wide range of conditions.  Natural rubber adhesive is slightly cured and designed for performance under variety of conditions: heat / bake cycles up to 203°F and exposure to most solvent-based paints.

Crepe paper backing, rubber impregnated for strength and durability. Higher elongation characteristics for improved masking features on curved surfaces. High tack, natural rubber adhesive engineered for good adhesion to diverse surfaces.

Tape has a good shelf life, resists water, solvents and oil and has ultraviolet resistors, which stabilize the product and prevent degradation.

Client must determine suitability of 254 Series masking for their specific requirements and application.

Item # Roll Size Units / Case Case Size Case Weight
254N07 3/4″ (18 mm) x 60 yd 48 / case – Accordian wrapped / sleeved n/a n/a
254N10 1″ (24 mm) x 60 yd 36 / case – Accordian wrapped / sleeved n/a n/a
254N15 1.5″ (36 mm) x 60 yd 24 / case – Accordian wrapped / sleeved n/a n/a
254N20 2″ (48 mm) x 60 yd 24 / case – Accordian wrapped / sleeved n/a n/a
254N30 3″ (72mm) x 60 yd 12 / case – Accordian wrapped / sleeved n/a n/a

Technical & Consumer Data

Physical Properties

Color: Natural
Thickness: 5.6 mils
Elongation: 10%
Tensile Strength: 20 lbs/in.
Adhesion To Stainless Steel: 32 oz/in.
Application Temperature Range: 32°F to 203°F

The physical and performance characteristics shown are averages obtained from tests recommended by  ASTM, government agencies or our own procedures. A particular roll may vary slightly from these averages and it is recommended that the purchaser determine the suitability for his own purpose.

Downloads

Technical Data Sheet

You may also like…