Polyethylene Bond Breaker Tape – 706B Series – Acrylic Adhesive

High tack acrylic adhesive, conformable film and high release backside combine to make a tape suitable for “Bond-Breaker” requirement for newly poured concrete when making expansion joints.

Tape is placed in void cut into newly cured concrete. Material used to fill void does not stick to tape backside allowing for tension release and eliminating cracks.


Our 706 Series is a 5.5 mil Low Density Polyethylene Film Tape coated on one side with a Specially Formulated Acrylic Adhesive System.

Its adhesive system provides high adhesion and cohesion which yields a permanent bond with virtually no edge bleed out. The tough polyethylene backing offers good abrasion and tear resistance. It is highly conformable and resistant to chemical deterioration. Outstanding moisture barrier properties. UV resistant. Excellent long term aging stability without yellowing. Tape will not crack or crease at low temperatures.


  • Used for various wrapping applications: water filter purification, pipe wrap, protective sealing
  • UV resistant and thus suitable for splicing, seaming & patching of films for agriculture or protective coverage of finished goods stored as outdoor inventory.
  • Designed for use in separation of dissimilar metals for insulation, roofing, metal fabrication, etc.
  • In narrow widths, can be used as a “Bond Breaker Tape” for concrete applications. Tape is applied to shallow cuts in concrete to minimize cracks & fissures during “settling” of recently poured & cured concrete.
Item # Roll Size Units / Case Case Size Case Weight
706B02 1/4″ (6.3 mm) x 36 yd 98 / case – Bulk n/a n/a
706B03 3/8″ (9.5 mm) x 36 yd 12 / case – Cello n/a n/a
706B05 1/2″ (12.7 mm) x 36 yd 48 / case – Bulk n/a n/a
706B06 5/8″ (15.8 mm) x 36 yd 38 / case – Bulk n/a n/a
706B07 3/4″ (19.0 mm) x 36 yd 32 / case – Bulk n/a n/a
706B08 7/8″ (22.2 mm) x 36 yd 28 / case – Bulk n/a n/a
706B10 1″ (25.4 mm) x 36 yd 24 / case – Bulk n/a n/a

Technical & Consumer Data

Physical Properties

Total Thickness: 5.5 mil
Tensile Strength: 10 lb./inch width
Elongation: 550%
Adhesive Type: Acrylic Based
Adhesion to Steel: 56 oz/inch
Operating Temperature: -40°F to 190°F
Moisture Vapor Transmission: Less than 2.0 gram/100 sq. in./24 hours
Colors: Black (other colors available upon request)


Technical Data Sheet

Safety Data Sheet

You may also like…