Acrylic Transfer Tape – 4 mil – 645 Series

Glass stabilized solvent based acrylic transfer adhesive

Wound on an easy to remove paper liner

High quality adhesive with strong holding power – excellent resistance to heat, UV, and aging

Tape bonds well to most surfaces – papers, metals, and films.


Our 645 Series is a premium acrylic transfer tape which consists of a pure acrylic adhesive system in conjunction with a siliconized Kraft paper release liner.

The adhesive is transparent, aging resistant and has a high tack level – suitable for general purpose and high demand bonding and mounting applications. 645 is also able to withstand elevated temperatures.

Application Information

  • Splicing of paper and filmic webs, particularly flying splices.
  • With heavy adhesive weight – suitable for textured surfaces
  • Used for laminating to both closed and open cell foams
  • Attachment of nameplates, aluminum, polyester, vinyls, decals, polycarbonates, and papers
Item # Size Units / Case Pack
64505 1/2″ (12 mm) x 60 yd 72 / case Bulk
64507 3/4″ (18 mm) x 60 yd 48 / case Bulk
64510 1″ (24 mm) x 60 yd 36 / case Bulk
64520 2″ (48 mm) x 60 yd 24 / case Bulk

Technical & Consumer Data

Physical Properties

Backing: None
Adhesive: Acrylic
Total Thickness:  4.7 mils
Adhesion (steel): 78 oz/inch
Temperature Resistance: -40°F – 230oF

Physical characteristics shown are averages from tests recommended by our own procedures. A particular roll may vary slightly from these averages. The buyer should determine the suitability for his own use.


Technical Data Sheet

You may also like…