Acrylic Transfer Tape – 2 mil – 643 Series

Glass stabilized solvent based acrylic transfer adhesive.Wound on an easy to remove paper liner

High quality adhesive with strong holding power – excellent resistance to heat, UV, and aging

Tape bonds well to most surfaces – papers, metals, films, etc.


Our 643 Series consists of a pure acrylic adhesive system in conjunction with a siliconized Kraft paper release liner. The adhesive is transparent, aging resistant and has a moderate tack level – suitable for general purpose bonding and mounting applications. The 643 is also able to withstand elevated temperatures.

  • Thin profile best suited for smooth surfaces
  • Temperature range: up to 300°F
  • Tape Thickness: 2.0 mil
  • Adhesion: 55 oz/in


  • Splicing of paper and filmic webs, particularly flying splices.
  • Mounting of displays and posters.
  • Scrapbooking and other photomounting & craft applications
Item # Size Units / Case Pack
643505 1/2″ (12 mm) x 60 yd 72 / case Bulk
643507 3/4″ (18 mm) x 60 yd 48 / case Bulk
643510 1″ (24 mm) x 60 yd 36 / case Bulk
643520 2″ (48 mm) x 60 yd 24 / case Bulk

Technical & Consumer Data

Physical Properties

Backing: None
Adhesive: Acrylic
Total Thickness: 2 mils
Adhesion (steel): 55 oz/inch
Temperature Resistance: 300°F , 149° C

Physical characteristics shown are averages from tests recommended by our own procedures. A particular roll may vary slightly from these averages. The buyer should determine the suitability for his own use.


Technical Data Sheet