Technical & Consumer Data
Physical Properties
Adhesive: Hi Performance Acrylic (Solvent based) adhesive coated on both sides
Carrier: Crosslinked PE foam (1/8” & 1/16” at 4PCF and 1/32” at 6 PCF)
Liner: 49 lb. bleached glassine paper release liner
Thickness: 1/32” (31 mil) – 1/16”(62mil) – 1/8”(125mil)
Peel Adhesion: PSTC-3 >90 oz. / inch or Foam Tear
Shear Strength: 2 psi indefinite
Elongation: 300%
Tensile: 5 lb./inch
Heat Resistance: 176 °F (79°C )
Minimum Application Temp: -10 °F (-23°C )
The physical and performance characteristics shown are averages obtained from tests performed according to ASTM and PSTC test methods. SUPPLIER can make no warranty of any kind as to the results of the adhesive product use. The information published here is representative of laboratory research on these products and is believed to be reliable. The information does not constitute a performance guarantee. Performance of the products may vary with individual applications and the purchaser should satisfy himself prior to use as to the suitability of the product for the particular application. SUPPLIER shall not be liable for damages in excess of the purchase price of its products or for incidental or consequential damages.
