General Purpose DC Paper Tape – Rubber Adhesive – 682 Series

Conformable double coated paper tape coated with an all-around performing solvent based natural rubber adhesive

Good balance of tack and shear

Economical alternative to our 591 Series


Our 682 Series is an excellent high tack general purpose double sided paper tape. A quality saturated paper is coated on each side with a solvent based natural rubber adhesive system.


  • Paper provides ease in use and flexibility – tape conforms well to curved areas.
  • Cured Natural rubber adhesive provides good balance of tack & shear making this a versatile tape


  • For bonding to a wide variety of plastics, glass, metals, papers, etc.
  • Also can be used for holddown when machining parts – tape removes cleanly in most cases with limited dwell (surface    conditions should be checked first by user)
  • Bonding of name plates & decorative trim; vertical/horizontal blind fastening
Item # Size Units / Case Pack
682004 1/2″ (12 mm) x 36 yd 72 / case Bulk
682005 3/4″ (18 mm) x 36 yd 48 / case Bulk
682006 1″ (24 mm) x 36 yd 36 / case Bulk
682008 2″ (48 mm) x 36 yd 24 / case Bulk

Technical & Consumer Data

Physical Properties

Backing: Saturated paper
Adhesive: Natural Rubber
Tape Thickness: 6.0 mil (exclusive of liner)
Adhesion: 45 oz/inch
Tensile Strength: 22 lbs/inch width
Elongation:  4% at break
Application Temperature: 60°F to 120°F
Temperature Range: 32°F to 225°F

The physical properties listed above are typical test results obtained from a series of laboratory tests and should not be used for the purpose of writing specifications.  Before using this product, user shall determine the suitability of the product for his/her use; and user assumes all risks and liabilities in connection therewith.  All test procedures used are in accordance with ASTM and PSTC methods.


Technical Data Sheet

You may also like…