Exhibition Carpet Cloth Tape – Rubber Adhesive – 105C Series

Industry Standard for temporary carpet hold down for the convention industry – leaves no residue off most surfaces

Thick profile is durable and conformable to irregular surfaces.


Multi-purpose premium grade double-faced cloth tape. Cotton / Polyester blended backing with rubber based adhesive on both sides.


• Double sided cloth tape with high grade silicone coated polyethylene release liner for easy unwind.
• Extremely aggressive rubber based adhesive coated on both sides.
• Designed for residue-free removal.


• Designed for carpet hold-down, especially for the convention industry.
• General purpose uses in aircraft manufacturing and construction.
• Multi-purpose use for general mounting and holding.

Item # Size Units / Case Pack
76062 1″ (24 mm) x 25 yd 24 / case Bulk
76064 2″ (48 mm) x 25 yd 24 / case Bulk

Technical & Consumer Data

Physical Properties

Thickness: 11 mil
Adhesion To Steel (air side): 47 oz. / in.
Adhesion To Steel (liner side): 52 oz. / in.
Tensile Strength: 24 lb. / in.
Color: Natural w/Blue Liner

*Features a Low VOC Content and thus can contribute toward satisfying EQ Credit 4.1 (Low Emitting Materials) under LEED®

The physical and performance characteristics shown are averages obtained from tests recommended by ASTM, government agencies or our own procedures. A particular roll may vary slightly from these averages and it is recommended that the purchaser determine the suitability for his own purpose.


Technical Data Sheet

You may also like…