PVC Gasket – Mylar Top – 655M Series

Foam carries an overlaminate of mylar (polyester) to provide enhanced abrasion resistance and rigidit

Low density, compressible PVC foam coated one-side with a general purpose, quick grab acrylic adhesive

Suitable for a variety of gasket functions, including seaming, sealing, spacing, squeak and rattle abatement, barrier to dust and light penetration, and dissimilar metals separation


Our 655M Series PVC Gasket Mylar Tape is a LOW density closed cell PVC foam tape coated on one side with a high performance acrylic adhesive on the other side a mylar polyester film is laminated to provide a durable abrasion resistant outer surface. Excellent combination of flexibility and & conformability with strength & wear resistance. Excellent weatherability & chemical resistance. It is a clean, waste free substitute for liquid sealants.

Similar to 655 foam but carries a topcoat of clear film to provide enhanced abrasion resistance.


Vibration dampening, sealing, seaming, and/or gasketing

Product Code Thickness Part # Size Units / Case Pack
655125M 1/8″ 655125M05 0.5″ (12 mm) x 75 ft 24 / case Bulk
655125M07 0.75″ (18 mm) x 75 ft 16 / case Bulk
655125M10 1″ (24 mm) x 75 ft 12 / case Bulk
655250M 1/4″ 655250M05 0.5″ (12 mm) x 35 ft 24 / case Bulk
655250M07 0.75″ (18 mm) x 35 ft 16 / case Bulk
655250M10 1″ (24 mm) x 35 ft 12 / case Bulk

Technical & Consumer Data

Physical Properties

Foam: PVC
Density (Range): 6 – 9 lb. per cubic foot
Shore Hardness “00”: 30
Thickness: 1/8” and ¼”
Force to Compress 25% (Range): 2.5 psi
Compression Deflection (Range): 1.5 psi
Tensile Strength: 40 psi
Color: Black
Adhesive: Water Based Acrylic
Water Absorption (%): 9
Low Temperature Flex: No Cracking
Flammability: Self Extinguishing

Physical characteristics shown are averages from tests recommended by our own procedures. A particular roll may vary slightly from these averages. The buyer should determine the suitability for his own use.


Technical Data Sheet

You may also like…