Rubber Splicing Tape – 40 Series – 30 mil

Self amalgamating rubber tape insulates and seals out moisture from electrical connections up to 600 V.

Also widely used in the agricultural industry for grafting crops.

Its high resistance to salt water, steam, oils, detergents, and other chemicals make it an ideal tape for service drops, bolted, and ground rod connections.

Description

A 30 mil low voltage rubber splicing rubber tape made of high quality, un-vulcanized rubber, which is suitable as a primary insulation for splices in electrical wires and cables of not more than 600 volts when used (overwrapped) with a Friction or Vinyl tape. Superior insulating & bonding qualities make it an excellent choice for pipe repair, automotive, marine, construction & many other general uses.

Features

A self fusing rubber tape that bonds quickly to itself without heat into a solid mass that is watertight for electrical protection. Conforms to irregular shapes & flexible to withstand expansion & contraction. Resists bleach, steam, saltwater, oils, detergents & other chemicals. Meets requirements of ASTM D-119 and HH-I-553C, Grade B. UL510 Listing #2C58.

Applications

  • Insulate electrical connections up to 600 V
  • Seal out moisture from low-voltage connections
  • Insulate service drops
  • Insulate lighting connections
  • Widely used in the agricultural industry as means for grafting crops
Item # Roll Size Units / Case Case Size Case Weight
40002-0030 3/4″ (19 mm) x 22 ft 30 – Cello / Label 11” x 8” x 4.75” 14 lbs
40002 3/4″ (19 mm) x 22 ft 100 – Cello / Label 16″ x 11″ x 8.375″ 45 lbs
40002-1100 3/4″ (19 mm) x 22 ft 100 – Cello 16″ x 11″ x 8.375″ 42 lbs
40004 1.5″ (38 mm) x 22 ft 50 – Cello 16″ x 11″ x 8.375″ 40 lbs
40005 2″ (50 mm) x 22 ft 50 – Cello / Label n/a 54 lbs
40008 3/4″ (19 mm) x 30 ft 50 – Cello / Label n/a 27 lbs
40008-1050 3/4″ (19 mm) x 30 ft 50 – Cello n/a 27 lbs
40011 2″ (50 mm) x 30 ft 32 – Cello n/a 45 lbs

Technical & Consumer Data

Physical Properties

Color Black / Blue Liner
Total Thickness (UL510) 30 mil
Tensile Strength (UL510) 275 psi
Elongation (UL510) 500%
Dielectric Strength (UL510 / ASTMD1000 / ASTM D149-13) 490 V/mil
Breakdown Voltage 14.6
Maximum Operating Temp. 80°C (176°F)

The physical and performance characteristics shown are averages obtained from tests recommended by ASTM, government agencies or our own procedures. A particular roll may vary slightly from these averages and it is recommended that the purchaser determine the suitability for his own purpose.

Downloads

Technical Data Sheet

You may also like…