Clear Polyethylene Tape – 705 Series – Acrylic Adhesive

Tape provides permanent bond – not designed for temporary protection requirement

Acrylic adhesive provides performance in broad range of temperatures as well as excellent aging characteristics

Available Colors: Clear


Our 705 Series Clear Polyethylene Tape is a 7.0 mil Low Density Film Tape coated on one side with a Specially Formulated Solvent Free Acrylic Adhesive System.

Its adhesive system provides high adhesion and cohesion which yields a permanent bond with virtually no edge bleed out. The tough polyethylene backing offers good abrasion and tear resistance. It is highly conformable and resistant to chemical deterioration. Outstanding moisture barrier properties. UV resistant. Excellent long term aging stability without yellowing. Tape will not crack or crease at low temperatures.

  • Used for various wrapping applications: water filter purification, pipe wrap, protective sealing
  • UV resistant and thus suitable for splicing, seaming & patching of films for agriculture or protective coverage of finished goods stored as outdoor inventory.
  • Designed for use in separation of dissimilar metals for insulation, roofing, metal fabrication, etc.
  • In narrow widths, can be used as a “Bond Breaker Tape” for concrete applications. Tape is applied to shallow cuts in concrete to minimize cracks & fissures during “settling” of recently poured & cured concrete.
Item # Roll Size Units / Case Case Size Case Weight
70520 2″ (48mm) x 36 yd 24 / case – Bulk n/a 15 lbs

Technical & Consumer Data

Physical Properties

Total Thickness: 7.0 mil
Tensile Strength: 20 lb./in width
Elongation: 225%
Adhesive Type: Acrylic Based
Adhesion to Steel: 35 oz/inch
Operating Temperature: -40°F to 190°F
Moisture Vapor Transmission: Less than 2.0 gram/100 sq. in./24 hours

The physical properties listed above are typical test results obtained from a series of laboratory tests and should not be used for the purpose of writing specifications. Before using this product, user shall determine the suitability of the product for his/her use; and user assumes all risks and liabilities in connection therewith. All test procedures used are in accordance with ASTM and PSTC methods.


Technical Data Sheet

Safety Data Sheet

You may also like…