Description
Our engineer-grade reflective tape is a high quality, durable, enclosed lens retroreflective material. This reflective tape offers exceptional value for permanent traffic signage applications. Meets applicable requirements for engineer-grade sheeting applications for Type 1 retroreflective sheeting as set forth in ASTM D 4956.
Excellent durability rating – 7 years when properly processed and applied
Item # |
Size |
Units / Case |
Pack |
83720_ |
2″ (50.8 mm) x 30 ft |
24 / case |
Bulk |
83730_ |
2″ (50.8 mm) x 150 ft |
6 / case |
Bulk |
Yellow/Black (1) Red/White (2) |
Technical & Consumer Data
Physical Properties
Adhesive: Permanent pressure sensitive (Class 1)
Face Film: High gloss
Liner: White polyethylene coated paper
Tape Application: Minimum application temperature 4°C (40°F)
Cleaning: Clean tape surface with a mild soap and rinse with fresh water
Shelf Life: One year, when stored at 73°F (23°C), 50% +/- 5% relative humidity
Meets all other requirements set forth in ASTM D 4956 including shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and outdoor weathering.
Photometric Performance: Exceeds types III and IV values per ASTM D 4956. Minimum coefficient of retroreflectivity (RA) cd/lx/m2)
The physical and performance characteristics shown are averages obtained from tests recommended by
ASTM, government agencies or our own procedures. A particular roll may vary slightly from these
averages and it is recommended that the purchaser determine the suitability for his own purpose.