Friction Tape – Premium Grade – 45P Series

Offers excellent mechanical protection against abrasion and penetration of low voltage cable, splices and wire.

Suitable for temporary binding and harnessing applications.

Useful for multitude of miscellaneous general purpose uses – i.e. when applied onto tool handles, it provides a non-slip surface.

Available Colors: BlackBrown

Description

Our 45P Series Premium Friction Tape consists of a high quality cotton cloth impregnated with specially compounded natural rubber and synthetic rubber blend adhesive which provides for superior adhesion to all types of surfaces. This tape offers excellent mechanical protection against abrasion and penetration of low voltage cable, splices and wire.  Suitable for temporary binding and harnessing applications. Also useful for multitude of miscellaneous general purpose uses – i.e. when applied onto tool handles, it affects a non-slip surface.

Unique adhesive blend – coated on both sides – provides for superior adhesion to broad range of surfaces – even for either side of tape.

Does not fray or unravel. Meets and exceeds the Requirements for ASTM D 69.

Item # Color Roll Size Units / Case Case Size Case Weight
45002P-1200 Black Black 3/4” (19mm) x 30ft 200 / case – Cello 14.75″ X 11.75″ X 8.5″ 40 lbs
45008P-0030 Black Black 3/4″ (19 mm) x 60 ft 30 / case – Cello / Label n/a 15 lbs
45008P-1100 Black Black 3/4″ (19 mm) x 60 ft 100 / case – Cello 20″ x 9″ x 8″ 32 lbs
45008P Black Black 3/4″ (19 mm) x 60 ft 100 / case – Cello n/a 15 lbs
45402P Black Black 3/4″ (19 mm) x 82.5 ft 50 / case – Cello n/a 30 lbs
45027P Black Black 1.5″ (38 mm) x 60 ft 50 / case – Cello 20″ x 9″ x 8″ 39 lbs
45028P Black Black 2″ (50 mm) x 60 ft 40 / case – Cello 20″ x 9″ x 8″ 40 lbs
45067P Brown Brown 3/4″ (19 mm) x 70 ft 100 / case – Cello 20″ x 9″ x 8″ 43 lbs
45068P Brown Brown 1″ (25 mm) x 70 ft 80 / case – Cello 20″ x 9″ x 8″ 43 lbs

Technical & Consumer Data

Physical Properties

Insulation Class: 80°C
Colors: Black & Brown
Adhesive: Natural & Synthetic Rubber / Resin
Total Thickness: 15 mil (.38 mm)
Tensile Strength: 44 lbs. / in.
Backing: Cotton Cloth
Adhesion ASTM D 69 – Standard: 7 in /min / Oven Temp.: 13 in/min.
Paralellism ASTM D 69: 1/8 inch max
Dielectric Strength ASTM D 69: 1,200 volt
Copper Corrosion ASTM D 69: None Visual
Application Temperature Range: 13°C to 32°C (55°F to 90°F)
Service Temperature Range: 5°C to 80°C (42°F to 176°F)

Physical characteristics shown are averages from tests recommended by our own procedures. A particular roll may vary slightly from these averages. The buyer should determine the suitability for his own use.

Downloads

Technical Data Sheet – 45P Black

Technical Data Sheet – 45P Brown

Safety Data Sheet

You may also like…