Friction Tape Bulk Wholesale

Friction Tape – Standard Grade – 45 Series

Cotton cloth impregnated with scientifically compounded pure rubber based adhesive for maximum elasticity and moisture resistance.

Standard color: Black

Tape Thickness: 15.0 mil
Tensile Strength: 40 lb/in

Description

Our 45 Series Friction Tape consists of a scientifically compounded pure rubber based adhesive properly calendared and impregnated into the highest-grade cotton cloth.

This tape is commonly used for over wrapping low voltage splices, harnessing and cover taping for many mechanical applications.

Our friction tape features superior strength and is resistant to abrasion and moisture. A high percentage of pure rubber is used for maximum elasticity and moisture resistance. Does not fray or unravel.

Item # Roll Size Units / Case Case Size Case Weight
45008-0030 3/4″ (19 mm) x 60 ft 30 / case – Cello / Label 11″ x 8″ x 5″ 15 lbs
45008 3/4″ (19 mm) x 60 ft 64 / case – Cello / Label 20″ x 9″ x 8″ n/a
45008-1100 3/4″ (19 mm) x 60 ft 60 / case – Cello n/a n/a
45306 1.5″ (38 mm) x 60 ft 50 / case – Cello n/a n/a
45308 2″ (50 mm) x 60 ft 24 / case – Cello n/a n/a
45402 3/4″ (19 mm) x 82.5 ft 42 / case – Cello n/a n/a

Technical & Consumer Data

Physical Properties

Insulation Class: 80oC
Color: Black
Adhesive: Rubber Resin
Total Thickness (ASTM D-3652): 15.7 mil (0.4 mm)
Tensile Strength (ASTM D-3759): 21.8 lbs. / in.
Backing: Cotton Cloth
Adhesion (ASTM D -3330): 3.2 oz / in.
Elongation (ASTM D-3759):  8 %
Dielectric Strength (ASTM D-1000): 1000 volt
Maximum Operating Temperature: 80oC (176°F)

Physical characteristics shown are averages from tests recommended by our own procedures. A particular roll may vary slightly from these averages. The buyer should determine the suitability for his own use.

Downloads

Technical Data Sheet

Safety Data Sheet

You may also like…