Duct Protection Film – 3 mil PE Film

Strong, durable low density polyethylene film coated with custom formulated water based acrylic adhesive.

Designed to protect UNINSTALLED duct systems from dirt, dust and debris during storage and transport.


Tough self-adhesive PE film specifically designed to be applied at the time of fabrication over the openings of ductwork systems. Film protects uninstalled HVAC duct during storage and shipping from dirt, dust, moisture, insects and other contaminants that can lead to poor air quality. Specially formulated adhesive system will adhere to the duct during transport and will not leave residue once removed. Film is strong and puncture resistant.

Item # Thickness Size Units / Case
599324B-200 3 mil 24″ (609 mm) x 200 ft 1 / case
599336B-200 3 mil 36″ (914 mm) x 200 ft 1 / case

Technical & Consumer Data

Physical Properties

Color: Light Blue
Thickness: 3.0 mil nominal
Adhesive: Water Based Acrylic
Adhesion SST: 12.0 oz/in (Test Method PSTC-1)
Tensile Strength (MD/CD): 3800 psi / 3000 psi (Test Method ASTM D 882)
Elongation (MD/CD): 470% / 950% (Test Method ASTM D 882)


  • Engineered to adhere firmly to ductwork openings during transportation and storage
  • Tough Abrasion & Puncture Resistant – Will not puncture or tear when applied to raw metal edges or sharp burrs
  • Specifically formulated adhesive provides ultimate protection against contamination due to moisture, dust & debris

Physical characteristics shown are averages from tests recommended by our own procedures. A particular roll may vary slightly from these averages. The buyer should determine the suitability for his own use.

You may also like…