Floor Protection Film – Hard Surface – 590 Series

High performance film consisting of a blend of PE resins designed for the protective film industry.

The film exhibits high clarity, superior resistance to punctures, and additional properties for unsurpassed performance in a variety of applications.

Offered in Both Standard Wind and Reverse Wind for Ease in Application


Our 590 Series Hard Surface Floor Protection Film is a temporary, yet extremely effective ways to protect solid floor surfaces (hardwood floor, ceramic tile, etc.) from tracked in dirt, paint spills, dust, construction debris, and damage. The film acts as a barrier of protection for your floor for up to 45 days.  Removal is as simple as lifting the film from the floor and discarding with no damage or residue left behind.

590 is a tough 3 mil. polyethylene film made with environmentally friendly, water based acrylic adhesive applied to one side.  The film is highly resistant to tearing and puncturing from sharp items such as tools or high heel shoes. The adhesive and the skid-resistant surface allow the film to stay in place and eliminate creases and tripping hazards typical with standard plastic tarps and drop cloths.

Item # Roll Size Units / Case Case Size Case Weight
590124 24″ (609 mm) x 200 ft 1 / case 24.75″ x 4.75″ x 4.75″ 6 lbs
590136 36″ (914 mm) x 200 ft 1 / case 37″ x 4.75″ x 4.75″ 9 lbs
590524RW 24″ (609 mm) x 500 ft 1 / case n/a n/a
590536 36″ (914 mm) x 500 ft 1 / case 37″ x 6″ x 6″ n/a

Typical Applications

  • Commercial & Residential Construction
  • Manufactured Housing
  • Summer Parties
  • Auto Service Centers & Showrooms
  • Hotels/Motels
  • Building Renovation
  • Entrance/Exit Areas
  • Restaurants
  • Painting Projects
  • Recreational Vehicles
  • Model Homes
  • Office Parties
  • Kennel Clubs
  • Stairs
  • Remodeling

Technical & Consumer Data

Physical Properties

Hazardous Components: None
Explosion Limits: None
Melting Temp: >190°F
Ignition Temp: 370°F
PH: Neutral
Adhesive: Environmentally friendly water based acrylic, chemically stable & inert
Dart Impact: 275 grams
Handling: No restrictions for handling or shipment
Manufactured In The USA

The physical and performance characteristics shown are averages obtained from tests recommended by ASTM, government agencies or our own procedures. A particular roll may vary slightly from these averages and it is recommended that the purchaser determine the suitability for his own purpose.


Technical Data Sheet