|
/ Vinyl Foam Tape - Gasketing Foam |
Please contact us for information and pricing on our Adhesive Tape Products.
(All products are sold in full case quantities only unless otherwise stated)
Toll Free: (800) 999-2218 or (813) 920-2218 or email us at: 
PVC Foam Tape - FLD Series
Description
Our PVCFLD Foam Tape series is domestic low density single-coated vinyl foam, 6-10 pound per cubic foot depending on thickness, and available from 1/16” to 1” thick. Common Foam Tape thicknesses are listed below at standard lengths but other combinations of thickness and length can be quoted on request.
Please note that medium density (PVCFMD series at 9-13 lb/cu.ft.), high density (PVCHD series at 13-17 lb/cu.ft.), and very high density (PVCVHD series at 17-21 lb/cu.ft.) can be quoted, too. Call with inquiries about specialty variants of this type of foam tape, such as mylar-backed, soft, window glazing, double-coated, and UL approved.
Product Usage
PVCFLD series has water-borne acrylic adhesive one side for a variety of gasketing functions, including seaming, sealing, spacing, squeak and rattle abatement, dust and light barrier, dissimilar metals separation, etc. Compare with products from St. Gobain, Foamseal, and Gaska Tape. Structural Engineering Tape.
Product Numbers | Sizes | Case Quantities
| Part # |
Thickness |
Length |
| PVCFLD125 |
1/8” |
75 FT |
| PVCFLD250 |
¼” |
35 FT |
| PVCFLD375 |
3/8” |
25 FT |
| PVCFLD500 |
½” |
25 FT |
| PVCFLD625 |
5/8” |
20 FT |
| PVCFLD750 |
¾” |
15 FT |
Warning: When comparing prices, please pay attention to roll lengths!
|
|
