Aisle Marking Tape
Aluminum Foil Tape
Cable Ties
Duct Tape
Electrical & Insulating Tape
Masking Tape
Packaging Tape (Carton Sealing)
Strapping Tape
Pipewrap Tape
Protective Films
Safety Tape
Stucco Tape
Thread Seal Tapes (PTFE)
Window Films
Double Coated Tape
Vinyl Foam Tape
Complete Product Listing


Electrical Insulating Tapes

Vinyl Electrical Tapes

Glass Cloth / Polyester


/ Electrical Insulating Tapes (Rubber Insulating and Friction)

  • 30 Mil Rubber Splicing
  • Friction Tape
  • 60 Mil Rubber Splicing
  • High Voltage Linerless Rubber
  • High Voltage Linered Rubber
  • Silicone Rubber
  • EPR 30 Mil Shielding Tape
  • Mastic Rubber Wrap
  • Electrical Filler Tape


  • Please contact us for information and pricing on our Adhesive Tape Products.
    (All products are sold in full case quantities only unless otherwise stated)
    Toll Free: (800) 999-2218 or (813) 920-2218 or email us at:



    Silicone Rubber
    (ETS-#160)

    Description

    Electrical protecting tape for indoor or outdoor use, to protect splices, connections and end cables from contaminations such as oil, dust, moisture, weather, sunlight, etc. Excellent electric strength, moisture and chemical resistance and conformability. Used wherever the ultimate in conformability is required to provide problem free insulating over irregular surfaces or where protection is sought from contaminated environments. Can be used for any type of emergency hose repair, including exhaust lines, marine hose repairs, automotive hose repairs, plumbing repairs, replacement for heat shrinkable tubing. Excellent replacement for electrical tape on boats.


    Features
    • Self-bonding silicone rubber wrap which readily adheres to itself when wrapped under tension. Fuses to form a homogeneous mass within 24 hours at room temperature. Applying heat after wrapping may shorten curing time.
    • No adhesive; leaves no sticky residue.
    • Clear polyethylene liner protects the tape from blocking.
    • Capable of withstanding temperature variations from -65oF to +500oF.
    • Excellent dielectric properties.
    • Waterproof.
    • Chemical resistant.
    • Resistant to salt water, sunlight, and fuels.
    • Produced in two configurations – triangular and rectangular. Triangular is thicker in the middle and tapers downward at each side with a line running down the apex of the tape. This acts as a guideline for succeeding wraps producing a uniform thickness layer.

    A) TRIANGULAR CONFIGURATION - 20 MIL - ORANGE/RED
    Product Numbers | Sizes | Case Quantities

    Product Code Size Units Case Packaging
    16120 1"  x   30 ft 48 / case individual bag


    B) RECTANGULAR CONFIGURATION - 12 MIL - GREY
    Product Numbers | Sizes | Case Quantities

    Product Code Size Units Case Packaging
    16012 1"  x   30 ft 48 / case individual bag

    Also Available: 20 mil red.

    The physical and performance characteristics shown are averages obtained from tests recommended by ASTM, government agencies or our own procedures. A particular roll may vary slightly from these averages and it is recommended that the purchaser determine the suitability for his own purpose.