Home Order Info Terms About us Product Tips
Aisle Marking Tape
Aluminum Foil Tape
Cable Ties
Duct Tape
Electrical & Insulating Tape
Masking Tape
Packaging Tape (Carton Sealing)
Strapping Tape
Pipewrap Tape
Protective Films
Safety Tape
Stucco Tape
Thread Seal Tapes (PTFE)
Window Films
Double Coated Tape
Vinyl Foam Tape
Complete Product Listing


/ Aluminum Foil Tapes

  • 1.5 Mil Aluminum Foil Tape
  • 6.5 Mil FSK Aluminum Foil Tape
  • 2 Mil Aluminum Foil Tape
  • 2.0 Mil Imprinted Aluminum Foil Tape
  • 3 Mil Aluminum Foil Tape
  • 2 Mil Foilastic Aluminum Foil w/ Rubber Adhesive


  • Please contact us for information and pricing on our Adhesive Tape Products.
    (All products are sold in full case quantities only unless otherwise stated)
    Toll Free: (800) 999-2218 or (813) 920-2218 or email us at:



    Foil Tape 2 Mil Aluminum Foil
    Acrylic Adhesive - Removable Paper Liner - Total Thickness 3.5 Mil - UL Listed (ETS-#510)

    Description

    A 2 Mil (50 micron) high strength aluminum foil coated with an aggressive, high temperature acrylic adhesive system. The foil conforms well to both fibrous and sheet metal ducts, providing an excellent vapor seal. The malleable foil also conforms well around corners and to irregular surfaces.

    Coated with a special cold weather acrylic pressure sensitive adhesive system which combines superior quick stick at normal temperatures with superior low temperature performance below freezing – this is the ultimate in cold weather tapes. Recommended for use at normal and elevated temperatures also.


    Application

    Primarily used for vapor sealing fiberglass duct board and sheet metal ducts, can also be used on FSK system.


    Features
    • Improved vapor sealing of fiberglass duct board, sheet metal ducts & FSK systems.
    • High tack cold weather acrylic adhesive combines superior quick stick at normal temperatures with superior low temperature performance at freezing.
    • Superior high temperature and high humidity performance.
    • Temperature resistance: - 35 F to 260 F. Minimum application temperature: - 25 F.
    • Adhesion: 96 oz/in width. Tensile Strength: 27 lbs/in width.
    • Comparable: Ideal 488, Compac 317, Compac 808, Shurtape AF-973, Nashua 322, Fasson 810, Polyken 337

    Product Numbers | Sizes | Case Quantities

    Product Code Size Units Case Packaging
    51002 2"     x 50 yd 24 / case bulk
    510025 2 ½" x 50 yd 20 / case bulk
    51003 3"     x 50 yd 16 / case bulk
    51004 4"     x 50 yd 12 / case bulk

    Physical characteristics shown are averages from tests recommended by our own procedures. A particular roll may vary slightly from these averages. The buyer should determine the suitability for his own use


    Web Design in Tampa Bay